That’s all there is to it! Now you can produce professional-sounding audio tracks to make your training content even better. Now, Peek 360 will record your narration as well as any audio playing from your computer, including screen reader narration and sound effects. When you launch Peek 360 to start a recording, select the Stereo Mix Device from the microphone icon.

If your microphone isn’t plugged in, you may hear some feedback lower your speaker volume until you plug in your mic. When that window displays, select the Listen tab and enable Listen to This Device. Right-click the microphone you’ll use for recording and select Properties. You’re almost done! Now you need the microphone to feed into your newly enabled Stereo Mix Device. Then select it again, right-click, and select Set as Default Device. Once you see Stereo Mix, select it, right-click, and choose Enable. Right-click and select Show Disabled Devices. In the Sound Control Panel, select the Recording tab. It’s disabled by default, so we need to enable it here. Another weird technical term? Not to fret! The stereo mix device is what Windows calls its default aggregate device. Once the Sound Control Panel opens, you’re ready for your next step. Once the Sound Settings window opens, click the Sound Control Panel link on the right-hand side. The easiest way to access the Windows 10 Sound Control Panel is to search for Sound from the Windows search box.

Let’s walk through how to create an aggregate device in Windows 10. While it sounds complicated, it’s really just a blanket term Windows uses to define an audio device that’s made up of both input (e.g., the microphone) and output (e.g., speakers) devices. When you see the words “aggregate device,” it’s easy to be instantly put off. Keep reading for step-by-step instructions. Thankfully, there’s a better way to capture both your audio on the correct microphone and the output from your computer at the same time, with a single click. Or you want to record the audio from your computer, so you turn the speakers way up and hope it sounds OK as you record with your microphone … but the results are always a little off. Sometimes you’re trying to record a screencast and you set your Peek 360 input to the wrong mic, capturing nothing but dead air.

Recording sound on pc